In order to use PVC Pipe Fittings, you must prepare your pipes properly. After washing them thoroughly, you must dry them by inserting them into the fittings. You must also apply solvent cement on the cut surfaces of the pipe. Then, the dry pipe must be inserted into the fitting. Be sure that the pipes fit tightly together. If not, they will not seal properly. When you glue them, you must use a special tool for that purpose.

Tees: Tees are long couplings that have a top and an outlet. They are a common plumbing fitting. They help to keep water flowing and are available in ABS, copper, and PVC. The tee's 'top' is at a 90-degree angle from the rest of the connector. Crosses: Crosses are essentially tees with two tops. Despite the name, they're still considered a basic type of PVC pipe fittings.

Adapters: These fittings join two pipes with different diameters. They are made from furniture-grade PVC and are untreated, so you won't have to worry about any blemishes. They also make it easier to seal pipes. An adapter can join threaded pipe with a non-threaded one. Then, it's time to attach the fittings to the pipes.

Sockets: Basically, these fittings attach one pipe to another. A plug is used to seal the other. A coupling is a bell-like fitting that is threaded. A cap is a plastic or metal cap that covers the end of a pipe. A plug is used to keep fluids from escaping. A couple of plugs are used to join PVC pipe with a different diameter.

The gasket is an important part of the fitting. It fills the gap between two surfaces. It's important to remember that PVC tees are made of flexible plastic. To prevent leaks, you should make sure that you have the correct tees for the size of your pipes. If the fittings are too loose or too tight, you might not have the right size. If you need to use a threaded one, make sure to use a threaded tee.

Besides the tee, a coupling is a fitting that connects two pieces together permanently. A coupling can connect two pipes, and some are male and female. A male coupling is used to connect two parts of the same diameter. If the pipes and the fittings are of the same size, they will work together. If not, you should avoid using spigot fittings for PVC pipe.

When you use PVC Pipe Fittings, you should choose a tee with the appropriate OD. You should remember that the OD of the PVC pipe should be the same as the OD of the fitting. In addition to the OD, the length should also be the same. The same is true for the length. In the case of a female, you should consider the OD. It is the size that is important when connecting steel.