中文简体
English
An irrigation sprinkler (or just a sprinkler, also referred to as a hosesprinkler) is an apparatus used to saturate large areas of land. Irrigation sprinklers are usually installed by using a network of pipes containing holes that receive water and transport it to the areas to be irrigated. Irrigation sprinklers can have a water delivery rate of about one liter per second. This rate is used to measure the quantity of water delivered to a specific area.
Irrigation is usually carried out with the use of a push button or a remote control, but some sprinklers are now being sold that can be operated manually. The important parts of the irrigation sprinkler head are the body and the nozzle. The body of the sprinkler head is made out of steel that is bent into the desired shape. For areas that need less watering than the entire yard, a small sprinkler head with less water capacity is installed.
Drip irrigation is the common type of irrigation system used today. The water is dispensed through a long tube that sends the water through the grounds. With the use of modern technology and materials, the process has been made more efficient. The basic parts of the drip irrigation sprinkler system are the pump, the hose, and the collector.
Impact Sprinklers: Impact irrigation sprinklers are used when very little water is needed in a certain area. Impact sprinklers use gravity to deliver the water. This system delivers water in a fine spray rather than a heavy flow. The cost of these systems is less expensive than other types of irrigation sprinklers because there is no need for a large pump.
Micro-sprinkler Systems Usually utilized on small areas: The common micro-irrigation systems usually use plastic film to direct the water stream. This directs the water to areas where the amount of water needed is minimal. These micro-sprinkler systems usually have timers that allow you to adjust the delivery of soil moisture to different areas in your lawn.
Timers and Drip Irrigation Systems: These two irrigation systems have timers that are set to correspond with planting times. When these timers are screwed onto the sprinklers, they will send out the required water amounts at the right time. These timers control the watering of your lawn by counting in advance how long it will take for the water to reach the intended areas of your lawn. There are also a timer based sprinklers where the timers are turned on manually. Both of these types are used ly for larger areas where manual watering may be too difficult or impractical.
Other Irrigation Sprinkler Tutorials: If you still aren't sure which kind of irrigation systems you want to get, why not ask an expert? An irrigation expert can help you make the right choice. Aside, from giving you helpful information regarding the types of sprinklers that you can get, an irrigation expert can also give you useful tips about fixing damaged valves or plumbing lines. This is important to ensure that you don't irrigate your lawn when it isn't fully prepared to be irrigated. When you ask professionals for tutorial or help, make sure that you put this as your priority so you don't end up with more problems after the installation.
You should also take note of proper maintenance of your irrigation equipment. Irrigation sprinklers should be checked regularly. This ensures that you get the out of your sprinklers. If there's a need for repairs, this should be done at once because this can prevent further damage to your pipes or valves and can even extend the life span of your sprinklers. It's always to take good care of your sprinklers to make sure that they work effectively.
